網路自癒管線

AI ↔ AI

故障偵測、拓撲分析、補救規劃、設定推送與驗證。

5 個節點 · 5 條連接telecom

agentclisystem

視覺化

故障偵測代理人agent

監控 SNMP trap、syslog 與遙測串流，偵測異常模式。

↓sequential→ 拓撲分析代理人

拓撲分析代理人agent

使用網路拓撲圖與依賴模型，分析故障的影響範圍。

↓sequential→ 補救規劃代理人

補救規劃代理人agent

產生補救執行手冊：故障轉移、重新路由或設定回滾。

↓sequential→ 設定推送代理人

設定推送代理人cli

透過 NETCONF 或 SSH 將設定變更套用至受影響的網路設備。

↓sequential→ 驗證代理人

驗證代理人agent

執行連線測試並確認 SLA 指標已恢復正常。

↓fallback→ 補救規劃代理人

在編輯器開啟

uc-network-self-heal.osop.yaml

osop_version: "1.0"
id: "network-self-heal"
name:"網路自癒管線"
description:"故障偵測、拓撲分析、補救規劃、設定推送與驗證。"

nodes:
  - id: "fault_detect"
    type: "agent"
    subtype: "worker"
    name: "故障偵測代理人"
    description: "監控 SNMP trap、syslog 與遙測串流，偵測異常模式。"

  - id: "topology_analysis"
    type: "agent"
    subtype: "llm"
    name: "拓撲分析代理人"
    description: "使用網路拓撲圖與依賴模型，分析故障的影響範圍。"

  - id: "remediation_plan"
    type: "agent"
    subtype: "planner"
    name: "補救規劃代理人"
    description: "產生補救執行手冊：故障轉移、重新路由或設定回滾。"
    security:
      risk_level: "high"

  - id: "config_push"
    type: "cli"
    subtype: "script"
    name: "設定推送代理人"
    description: "透過 NETCONF 或 SSH 將設定變更套用至受影響的網路設備。"
    security:
      risk_level: "high"

  - id: "verify"
    type: "agent"
    subtype: "llm"
    name: "驗證代理人"
    description: "執行連線測試並確認 SLA 指標已恢復正常。"

edges:
  - from: "fault_detect"
    to: "topology_analysis"
    mode: "sequential"
  - from: "topology_analysis"
    to: "remediation_plan"
    mode: "sequential"
  - from: "remediation_plan"
    to: "config_push"
    mode: "sequential"
  - from: "config_push"
    to: "verify"
    mode: "sequential"
  - from: "verify"
    to: "remediation_plan"
    mode: "fallback"
    label: "Verification failed, try alternate remediation"